Safety Gears
Progressive and Instantaneous Safety Gears
Subcategories
-
Progressive safety gears
Compact and of reduced dimensions to incorporate to any chassis.
Available for any guide width between 8 and 16 mm.
Progressive execution, only in descent and ascent and descent.
High load capacities, up to P + Q = 4.000 Kg. And Vel. Nom = 1,6m / s
Models:
M-240: Only descent.
M-245: Ascent and descent. M-245B Only descent.
M-247: Ascent and descent. M-247B Only descent.
M-290: Ascent and descent. M-290B Only descent.
GV-2000: Ascent and descent. GV-2000.xxB Only descent. -
Instantaneous safety gear
Reduced dimensions with high load capacity.
Available for any guide width between 8 and 16 mm.
With roller guide plate to avoid its loss and improve its sliding.
Models:
M-253: Very small dimensions. Special for low speed elevators. 9mm guide.
M-255: Valid for Guides from 8 to 15 mm.
M-256: Special for high loads and 16mm guide. (Maintains the dimensions and ties of the M-255).
M-600: Parachute Large loads. With a compact design it is certified for a P+Q of up to 14,835Kg. -
Paracaídas Electrónicos
-
GV-2000E.09
Progressive safety gears GV-2000
• High capacity of P+Q (up to 2000 7.5% Kg.)• Reduced dimensions, it allows you to install in longitudinal beams of 120mm.• Wide clearance (4 mm) between roller ad guide rail.• The driving mechanism is characterized by his simple assembly and smooth performance.• Valid for any guide thickness between 9 and 16mm.• Available for up and down or just down.•... -
M245-2.09
Progressive safety gears M245/2000
• High capacity of P+Q • Valid for any guide thickness between 8 and 16mm• Available for up and down or just down• Safety gear block length is 2000 mm• EU Certificate according to EN 81-20, EN 81-50• EAC Certificate -
GV-2000.09
Progressive safety gears GV-2000
• High capacity of P+Q (up to 2000 7.5% Kg.)• Reduced dimensions, it allows you to install in longitudinal beams of 120mm.• Wide clearance (4 mm) between roller ad guide rail.• The driving mechanism is characterized by his simple assembly and smooth performance.• Valid for any guide thickness between 9 and 16mm.• Available for up and down or just down.•... -
M290.09
Progressive safety gears M290
• Safety gears for large loads, upto 4000Kg• Available guide rail of 16mm• Available for up and down or just down• Reduced dimensions. Allowing installation inside longitudinal beams of 140mm• Certificato UE secondo EN 81-20, EN 81-50• Certificato EAC -
M247.09
Progressive safety gears M247
• Reduced dimensions. Allowing installation inside longitudinal beams of 140mm• Suitable for loads upto 2406Kgs and lift speeds of 1.6m/s• Suitable for installation in any guide rail thickness from 9-16mm• Available for up and down or just down• EU Certificate according to EN 81-20, EN 81-50• EAC Certificate -
M245.09
Progressive safety gears M245
• High capacity of P+Q • Valid for any guide thickness between 8 and 16mm• Available for up and down or just down• EU Certificate according to EN 81-20, EN 81-50• EAC Certificate -
M240.09
Progressive safety gears M240
• Designed for easy installation• P+Q (upto 1492 +/-7,5% Kg), and lifts speeds of a 1,5 m/s• Suitable for installation in any guide rail thickness from 8-16mm• Progressive action, in descent• EU Certificate according to EN 81-20, EN 81-50• EAC Certificate -
M255.09
Instantaneous safety gear M255
• Safety gears for general use with large load capacity• Suitable for all guide rail of thickness between 8 and 15mm, types (A) and (B)• Maximum rated speed 0,63 m/s• Maximum governor's or equivalent means tripping speed 1,00 m/s• Maximum mass (P+Q) 4438kg• EU Certificate according to EN 81-20, EN 81-50• EAC Certificate -
M600.16
Instantaneous safety gear M600
• Safety gear with great load capacity• Available for guide widths of 16mm. Type (A) and (B)• P+Q of upto 14.836 kg for tripping speed of 0,30m/s• EU Certificate according to EN 81-20, EN 81-50• EAC Certificate
Safety gear
