Categories

Overspeed Governors

Overspeed Governors

Overspeed Governors - Models GERVALL and ALJO

  • Governor Gervall pulley Ø200
    Governor Gervall pulley Ø200
    Model 60 Overspeed Governors

    These overspeed governors are set in motion when the levers open by centrifugal force, both in ascents and descents, when the cabin overspeeds.
  • Governor Gervall pulley Ø300
    Governor Gervall pulley Ø300
    Model 60 Overspeed Governors

    These overspeed governors are set in motion when the levers open by centrifugal force, both in ascents and descents, when the cabin overspeeds.

  • Overspeed Governor Europe Ø200
    Overspeed Governor Europe Ø200
    The roller revolves in the same direction as the lift until it touches the disc of the locking device and is stopped between the disc and the wedge of the pulley, thus producing the mechanical locking of the overspeed governor.

  • Overspeed Governor Europe Ø300
    Overspeed Governor Europe Ø300
    The roller revolves in the same direction as the lift until it touches the disc of the locking device and is stopped between the disc and the wedge of the pulley, thus producing the mechanical locking of the overspeed governor.
  • Overspeed gobernor Goliath
    Overspeed gobernor Goliath
    These overspeed governors actívate on opening their levers, by the effect of centrifugal forcé, when there is an overspeed of the car, in both ascent and descent.
  • Governor Zeus installation on Board
    Governor Zeus installation on Board
    Overspeed governor Zeus with boarding on car.
  • Overspeed Governors Aljo 2128
    Overspeed Governors Aljo 2128
    Overspeed governors for installation in lift and freight lifts.
  • Overspeed Governor Aljo 2129
    Overspeed Governor Aljo 2129
    Overspeed governors for installation in lifts and freight lifts.
  • Overspeed Governor Aljo 2130
    Overspeed Governor Aljo 2130
    Overspeed governors for installation in lifts and freight lifts.
  • Overspeed governor GV120
    Overspeed governor GV120
    GV-120 V1: Installation in machine room and shaft.
    GV-120 V2: Installation in framework.
    GV-120 V3: Integrated system of overspeed governor + driving set + safety gears.
  • Overspeed governor GV200
    Overspeed governor GV200
    The GV200 overspeed governor is designed to allow interlocking when ascending or descending.
    This overspeed governor can be installed in the machine room or elevator shaft.
  • 28.200
    • Diameter of pulley Ø200 mm.• Overspeed governors to act in ascent and descent.• Centrifugal force drive.• For lifts with and without machine rooms (MRL lifts).• Overspeed governor with device to detect and protect the Unintended Car Movement, UCM.• EU Certificate according to standards of reference EN81-20, EN81-50.
  • 28.100
    • Diameter of pulley Ø120 mm.• Overspeed governors to act in ascent and descent.• Centrifugal force drive.• For lifts with and without machine rooms (MRL lifts).• Overspeed governor with device to detect and protect the Unintended Car Movement, UCM.• EU Certificate according to standards of reference EN81-20, EN81-50.
  • 2129.TKE230
    • Overspeed Governor pulley diameter Ø200 mm.• Interlock system trigger activation.• Option of manual automatic reset contact or remote reset.• With encoder (HOHNER).• For lifts without machine rooms.• Overspeed governors to act in ascent and descent or only descent.• EU Certificate according to standards of reference EN81-20, EN81-50.• EAC Certificate.
  • 20.345
    • Overspeed governor with device to detect and protect the Unintended Car Movement, UCM.• For lifts with machine rooms.• Overspeed governors Model Europe to act in ascent and descent.• Small size base.• Centrifugal force drive.• Pulley diameter Ø300 mm.• EU Certificate according to standards of reference EN81-20, EN81-50.• EAC Certificate.
  • 20.245
    • Overspeed governor with device to detect and protect the Unintended Car Movement, UCM.• For lifts with machine rooms.• Overspeed governors Model Europe to act in ascent and descent.• Small size base.• Centrifugal force drive.• Pulley diameter Ø200 mm.• EU Certificate according to standards of reference EN81-20, EN81-50.• EAC Certificate.
  • 2128.TSA2D
    • Overspeed Governor Aljo certified for low tripping speeds.• Option of manual reset contact or automatic reset contact.• Remote tripping of 230VAC o 24VDC can be installed.• Overspeed governors to act in ascent and descent or only descent.• For lifts without machine rooms.• Interlock system trigger activation.• Diameter of pulley 200mm.• EU Certificate...
  • 27.106I
    • Overspeed for installation in framework, left.• Diameter of pulley Ø120 mm.• Overspeed governors to act in ascent and descent.• Centrifugal force drive.• EU Certificate according to standards of reference EN81-20, EN81-50.
  • 20.346
    • Overspeed governor with device to detect and protect the Unintended Car Movement, UCM.• For lifts without machine rooms.• Overspeed governors Model Europe to act in ascent and descent.• Small size base.• Centrifugal force drive.• Pulley diameter Ø300 mm.• EU Certificate according to standards of reference EN81-20, EN81-50.• EAC Certificate.
  • 20.302
    • For lifts without machine rooms.• Overspeed governors Model Europe to act in ascent and descent.• Wide base / Small size base.• Centrifugal force drive.• Pulley diameter Ø300 mm.• EU Certificate according to standards of reference EN81-20, EN81-50.• EAC Certificate.

Overspeed Governor (57 products)